5 Series E61 523i (N52) TOUR
Installation:
To align panorama sunroof to body-cutout, insert screws and tighten loosely.
Panorama sunroof must still be able to move in the body-cutout.
On account of leaks, panorama sunroof must be exactly aligned to body-cutout.
Insert special tool 54 1 110 into centering bores up to stop in panorama sunroof and body.
Tighten down screws.
Tightening torque: 54 12 02AZ
.
E53 only:
Side centering bore omitted on body side.
Align panorama sunroof over front centering bore in longitudinal direction and align at sides over glass cover
distance to body. (See next work step).
Important!
Do not crush any cables when fitting the glass slide/tilt sunroof.
Initialize glass slide/tilt sunroof.
RA Removing and installing complete glass slide/tilt sunroof
BMW AG - TIS
05.02.2013 13:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
