5 Series E61 523i (N52) TOUR
61 31 238
Removing and installing/replacing Lane
Departure Warning motor electrics (standard
steering wheel)
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove airbag unit
Release screws (1) and remove retaining plate (2).
Tightening torque 32 33 2AZ
.
Disconnect plug connection (1).
Release screw (2).
Release screws (3) and remove motor electrics (4) complete
with electrical wires.
Installation:
Replace screws (2 and 3).
•
(2) Tightening torque 32 33 3AZ
•
(3) Tightening torque 32 33 4AZ
Ensure correct cable routing.
RA Removing and installing/replacing Lane Departure Warning motor electrics (standa
BMW AG - TIS
05.02.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
