5 Series E61 523i (N52) TOUR
61 31 245
Removing and installing / replacing rear
window button
Necessary preliminary tasks:
•
Remove shaft bearing for rear window wiper
Important!
When disconnecting plug connection (2), make sure no
tensile load is exerted on foil conductor (risk of damage).
If necessary, remove adhesive tape (1).
Disconnect plug connection (2).
Remove secured rear window button (3).
Installation:
If necessary, replace gasket.
Installation:
Feed in cable (2) of rear window button (1) through bore
hole (3).
Connect plug connection (4) and secure with adhesive tape if
necessary.
RA Removing and installing / replacing rear window button
BMW AG - TIS
05.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
