5 Series E61 523i (N52) TOUR
61 35 201
Removing and installing (replacing) power
amplifier (LCPA)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove luggage compartment floor trim
•
If necessary, remove storage tray for car jack
•
If necessary, remove spare wheel
•
Remove cover for control units
M5 only:
•
Remove battery
Note:
Depending on the equipment specification, the position of the
power amplifier (2) can vary.
Pull power amplifier (2) out of equipment mounting (3).
Disconnect plug connection (1).
Replacement:
Carry out vehicle programming/coding.
Note:
The power amplifier is coded by means of the Body Basic Module
(KBM).
RA Removing and installing (replacing) power amplifier (LCPA)
BMW AG - TIS
05.02.2013 14:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
