5 Series E61 523i (N52) TOUR
61 61 010
Checking/adjusting contact angle of
windscreen wiper arms on windscreen
Special tools required:
•
00 9 331
•
61 6 100
Note:
Wipe quality is improved by precise adjustment of
contact/approach angle of wiper arms.
Adjustment angle can be checked with special tool
00 9 331 or 61 6 100 .
Checking with setting gauge:
Remove load from windscreen wiper blades (1) before checking
contact angle. To do so, lift wiper blades (1) briefly off windscreen
before placing them back on windscreen.
Fit special tool 00 9 331 as illustrated on wiper arm and
windscreen.
When the contact angle is correctly adjusted, no light gap is visible
between special tool 00 9 331 and the wiper arm.
If necessary, adjust wiper arm.
Checking with angulometer:
Remove wiper blades.
Insert windscreen wiper arm (1) in special tool 61 6 100 .
Using screw (2) and pressure plate (3), locate windscreen wiper
arm (1) and position on windscreen.
Read off scale value, adjust wiper arm if necessary.
Note:
Windscreen wiper arm (1) must rest correctly on lower and
side contact surfaces (4) of special tool 61 6 100 .
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
05.02.2013 14:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
