bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Left Or Right Tail Light (on Rear Lid)|Page 2597 > < 4 RA Removing And Installing_replacing Left Or Right Rear Light (in Side Panel)|Page 2595
Page 1
background image

63 21 183

Removing and installing/replacing left or right
tail light (on rear lid)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Open rear light/rear lid cover

Fold foam (1) in direction of arrow out of lower rear lid panel (2).

Slacken nut (1) until clamping jaw (2) can be routed past rear
lid (3).

Tightening torque  63 21 1AZ

.

Installation:

Make sure clamping jaw (2) is correctly seated on rear lid (3).

Fold rear light (4) outwards out of rear lid (3).

Disconnect plug connection (5).

Remove rear light (4).

RA  Removing and installing/replacing left or right tail light (on rear lid)

BMW AG - TIS

05.02.2013  15:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Left Or Right Tail Light (on Rear Lid)|Page 2597 > < 4 RA Removing And Installing_replacing Left Or Right Rear Light (in Side Panel)|Page 2595