bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Heater - A_C Unit Fan|Page 2665 > < 3 RA Replacing Heater Core
Page 1
background image

64 11 213

Removing and installing/replacing heater -
A/C unit fan

Necessary preliminary tasks:

Remove storage compartment.

Remove audio system controller / 

Car Communication Computer.

Remove trim panel for pedal assembly.

Remove right glovebox with housing.

Disconnect rear compartment air duct (1) in direction of arrow.

Installation:

Make sure rear compartment air duct (1) is correctly seated.

Release screws (1).

Remove middle function carrier (2) in direction of arrow.

Installation:

Make sure middle function carrier (2) is correctly seated.

Ensure correct cable routing.

Necessary preliminary tasks:

If necessary, remove temperature sensor for cold-air

distributor.

Unfasten plug connection (1) and disconnect.

Release clips (2).

Unfasten plug connection (3) and disconnect.

Remove rear compartment air duct (4) in direction of arrow.

Installation:

Make sure rear compartment air duct (4) is correctly seated.

RA  Removing and installing/replacing heater - A/C unit fan

BMW AG - TIS

05.02.2013  15:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Heater - A_C Unit Fan|Page 2665 > < 3 RA Replacing Heater Core