bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing Independent_auxiliary Heater|Page 2698 > < 4 RA Removing And Installing Independent_auxiliary Heater
Page 2
background image

Note:

Disconnect fuel line on independent heater with special tool 
13 3 010 .

Recycling:

Fuel escapes when fuel line is detached. Have a suitable
collecting container ready.

Catch and dispose of escaping fuel.

Observe country-specific waste-disposal regulations.

Release hose clip (1) and detach fuel line.

Release spring clips (2) and detach coolant hoses. 

Installation:

Top up coolant and vent cooling system.

Unscrew nut (3).

Warning!

Secure independent heater against falling out.

RA  Removing and installing independent/auxiliary heater

BMW AG - TIS

05.02.2013  15:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing Independent_auxiliary Heater|Page 2698 > < 4 RA Removing And Installing Independent_auxiliary Heater