5 Series E61 523i (N52) TOUR
64 53 551
Removing and installing or replacing
condenser for A/C system
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
Important!
Do not place front panel centre section (2) on jump start
terminals.
Do not kink Bowden cables for engine hood locking.
Release screws (1).
Remove front panel centre section (2) in direction of arrow and
place to one side.
RA Removing and installing or replacing condenser for A/C system
BMW AG - TIS
05.02.2013 16:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
