bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Module For Passenger Compartment Protection (v|Page 2833 > < 4 RA Removing And Installing_replacing Module For Passenger Compartment Protection (v
Page 2
background image

Note:

Remove both rear and if necessary front counter supports for
luggage compartment net.

Fold up cover (1).

Release screw (2) and remove counter support for luggage
compartment net (3).

Lever covers (1) and (3) with special tool 

00 9 341  out of

roofliner (2).

Unlock catches (1) on both sides and remove sensor (2) from
cover (3).

Note:

Remove second sensor in the same way.

Catches (1) and mounts (2) of cover (3) must not be damaged.

Make sure covers (3) are correctly seated in roofliner.

RA  Removing and installing/replacing module for passenger compartment protection (v

BMW AG - TIS

05.02.2013  16:37

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing_replacing Module For Passenger Compartment Protection (v|Page 2833 > < 4 RA Removing And Installing_replacing Module For Passenger Compartment Protection (v