5 Series E61 523i (N52) TOUR
65 77 680
Removing and installing (replacing) airbag
control unit with gateway module
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Note:
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover
•
Remove trim for instrument panel at bottom right
RA Removing and installing (replacing) airbag control unit with gateway module
BMW AG - TIS
05.02.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
