5 Series E61 523i (N52) TOUR
65 82 050
Removing and installing (replacing) on-board
monitor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
Proceed with care so as to avoid damaging the on-board
monitor and adjoining trims.
Release screws (1).
Fold out on-board monitor (2) in direction of arrow.
Unlock plug connections (1) and disconnect.
Installation:
Ensure correct cable routing.
Remove on-board monitor (2).
RA Removing and installing (replacing) on-board monitor
BMW AG - TIS
05.02.2013 16:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
