5 Series E61 523i (N52) TOUR
67 62 ...
Notes on initializing power window
Note:
Initialization is performed on the power window switch of the
relevant door.
Initialization comprises:
•
Normalization
•
Learning characteristic curve
With normalization, the mechanical end stops of the power
window are recorded and stored.
The characteristic curve is learnt immediately after normalization.
When the characteristic curve is learnt, the mechanical closing
forces of the power window are recorded and stored for correct
operation of the anti-trapping mechanism.
Initialization, i.e. normalization and learning of characteristic curve,
is performed in a continuous operation.
Note:
An initialization must be performed:
•
In the event of malfunctions, e.g. no one-touch function, no
opening or no comfort function possible.
•
After the power window drive or door module has been
replaced.
•
After work is carried out on the power window mechanism.
Warning!
There is no anti-trapping protection during initialization.
RA Notes on initializing power window
BMW AG - TIS
05.02.2013 17:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -