5 Series E61 523i (N52) TOUR
Remove protective caps (1).
Release nuts (1) and remove.
Installation:
Use new self-locking nuts.
Tightening Torque,
refer to Technical Data 86 10 14AZ.
Tilt top reversing housing (1) in direction of arrow towards rear.
Slide out top reversing housing (1) and bottom reversing housing
with handbrake lever unit (2) in direction of arrow towards rear.
Remove holder (1) towards bottom.
RA Removing overrunning equipment/maintaining or replacing guide bush/installing ov
BMW AG - TIS
05.02.2013 18:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -