5 Series E61 525d (M57TU) TOUR
Remove bolts (arrows).
Replace profile gaskets (1).
Clean sealing surface to remove all gasket remnants.
Remove gasket debris from sealing faces (2) of cylinder head and
clean.
Apply a bead of Drei Bond 1209 sealing compound (refer to BMW
Parts Service), approx. 3 mm wide and 2 mm high, in area of
joints (1).
Note:
Illustrations show M57.
Assemble engine.
RA Removing and installing, sealing/replacing cylinder head cover (M57TU)
BMW AG - TIS
11.02.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -