5 Series E61 525d (M57TU) TOUR
Use 2 EMC screws in areas (1).
Use 2 EMC screws in areas (3).
If an engine carrier partial replacement has been carried out, 2
EMC screws must also be used in areas (2).
Open rivet joints in areas (1) and (2).
As a rule, part of the punch rivet remains in the units compartment
partition wall in areas (1) and (2). Drill out remnants.
Installation:
Carry over bores from units compartment partition wall to new part
in area (2).
Use 3 rivets (size 13) in area (1).
Use 2 rivets (size 13) in area (2).
Note:
Right side only:
Open rivet joints in areas (1).
Installation:
Use 2 rivets (size 13) in areas (1).
Open weld joints in areas (1) and (2).
Open rivet joints in area (2).
Installation:
If necessary, replace brazed seams with MAG weld seams in area
(1).
Use 2 rivets (size 13) in area (2).
RA Replacing front left wheel arch
BMW AG - TIS
11.02.2013 14:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -