bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Rear Window Wiper Motor (Touring) > < 2 RA Removing And Installing_replacing Rear Window Wiper Blade
Page 1
background image

61 62 030

Removing and installing/replacing wiper arm
on rear window

Fold up cover cap (1) in direction of arrow.

If necessary, spread internal mounts (2) as illustrated and
remove cover cap (1).

Mounts (1) and catches (2) of cover cap (3) must not be
damaged.

Raise rear window wiper arm (1).

Release nut (2) and remove rear window wiper arm (1).

If necessary, replace wiper blade.

Installation:

Wiper motor must be in end position.

Adjust dimension (A) between middle of rear window wiper
arm and rear window edge.

Measurement (A): 30 mm.

Tighten nut to specified torque, tightening torque 61 62 5AZ

.

RA  Removing and installing/replacing wiper arm on rear window

BMW AG - TIS

11.02.2013  21:34

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Rear Window Wiper Motor (Touring) > < 2 RA Removing And Installing_replacing Rear Window Wiper Blade