5 Series E61 525d (M57TU) TOUR
Tightening torque 72 12 03AZ
.
Feed all holders (2) out of sheet metal flange.
Note:
The retainers behind the holders can break off. These retainers serve as an installation aid during series
production and are not important for repairs.
Release screw (1) on anchor fitting at rear.
Tightening torque 72 12 04AZ
.
Unclip folding pack.
Release front screws (1 and 2).
Tightening torques:
-
Screw 1 72 12 04AZ
-
Screw 2 72 12 06AZ
Feed out gas generator, unlocking and disconnecting plug (3) in
so doing.
Remove gas generator completely.
Installation:
Pay attention to coding of gas generator.
Note:
View of retaining screw with anchor fitting of AHPS2 head airbag:
1
Anchor fitting, AHPS2 head airbag
2
Lock washer
3
Retaining screw
RA Removing and installing/replacing left or right AHPS2 head airbag
BMW AG - TIS
12.02.2013 04:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -