5 Series E61 525i (M54) TOUR
32 41 311
Replacing suction line for power steering
(M54)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove front underbody protection
Unfasten hose clip (1).
Detach suction line (2) from vane pump.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Expose suction line up to connection on fluid reservoir.
RA Replacing suction line for power steering (M54)
BMW AG - TIS
13.02.2013 04:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -