bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing _ Replacing Module Carrier > < 2 RA Removing And Installing Radiator (N52)|Page 598
Page 1
background image

17 11 035

Removing and installing/replacing fan cowl
with electric fan (N52)

Necessary preliminary tasks:

Read out fault memory of DME control unit

Switch off ignition

Remove radiator cover

The E60, E65/N52 have no AUC sensor on the fan cowl.

Unlock and disconnect both plugs (1).

Raise fan cowl (2) approx. 3 cm.

Note:

For purposes of clarity, this work step is shown on the fan cowl
after it has been removed.

Fold in left retaining tab (1) in direction of arrow.

Remove fan cowl towards top.

Note:

Check stored fault messages.

Now clear the fault memory.

RA  Removing and installing/replacing fan cowl with electric fan (N52)

BMW AG - TIS

17.02.2013  20:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing _ Replacing Module Carrier > < 2 RA Removing And Installing Radiator (N52)|Page 598