5 Series E61 525xi (N52) TOUR
27 10 020
Installing replacement transfer case (ATC 300)
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Recycling:
Catch and dispose of escaping transmission oil. Observe country-
specific waste-disposal regulations.
Important!
After completing work, check transmission oil level and top up
if necessary.
Release filler plug (1).
Check oil level.
Tightening torque 27 00 11AZ
.
Pour in transmission oil up to lower edge of opening for filler
plug (1).
Use only the approved transmission oil.
Failure to comply with this requirement will result in serious
damage to the transfer case!
Necessary preliminary tasks:
-
Drain transmission oil at oil drain plug
Tightening torque, 27 00 11AZ
.
-
Remove transfer case
RA Installing replacement transfer case (ATC 300)
BMW AG - TIS
17.02.2013 23:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -