5 Series E61 525xi (N52) TOUR
27 21 030
Replacing radial shaft seal for front axle
output (ATC 300)
Special tools required:
•
27 1 450
Important!
After completion of work, check transmission oil level.
Use only the approved gear oil in this transfer case.
Necessary preliminary tasks:
•
Remove front propeller shaft.
Lever output flange (1) out of housing with screwdriver (2).
Lever radial shaft seal out of housing with a suitable tool.
Important!
Do not damage housing.
RA Replacing radial shaft seal for front axle output (ATC 300)
BMW AG - TIS
18.02.2013 00:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
