5 Series E61 525xi (N52) TOUR
37 14 511
Replacing front ride-height sensor (AWD)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove right steering gear cover
Release nut (1) and disconnect jointed rod (2).
Tightening torque 37 14 7AZ
.
Release screws (4), remove ride-height sensor from front axle
carrier and disconnect plug connection.
Installation:
Sensor lever (3) must point from ride-height sensor to right front
wheel.
Tightening torque 37 14 6AZ
.
After installation:
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor (AWD)
BMW AG - TIS
18.02.2013 08:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -