5 Series E61 525xi (N52) TOUR
Installation:
Apply adhesive (1) to inside of side panel (2) at distance a.
Dimension a = 10 mm
Installation:
Apply adhesive in area (1).
Measurement a = 140 mm from edge of cover for longitudinal
member.
Flange edge of side panel in area (1) flush to outer wheel arch
section.
Flange edge of wheel arch (3) of rear side panel flush to outer
wheel arch section.
Do not flange sharp edges as the flange edge may begin
breaking!
Measurement a=4.5 mm
(1) Adhesive
(2) Side panel, rear
Note:
Additional work steps for M5 end here.
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
18.02.2013 09:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
