5 Series E61 525xi (N52) TOUR
51 31 200
Removing and installing/replacing rear
window
Necessary preliminary tasks:
•
Remove antenna amplifier
Note:
This work step must be carried out with a second person
assisting.
Slacken nuts (4) on left/right.
If spacers are fitted, remove them and make a note of number.
Release screw connections (2 and 4) on left/right and remove
holder (3).
Feed out cable and remove rear window (1) from hinge (5).
Set rear window (1) down on a clean surface.
Important!
The rear window (with frame) must not be pulled or lifted by its
plugs, wires or foil conductor (risk of damage).
Install rear window (1) and fix in place with screws (2).
Observe gap dimensions of rear window (1).
If necessary, adjust rear window.
RA Removing and installing/replacing rear window
BMW AG - TIS
18.02.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -