5 Series E61 525xi (N53) TOUR
25 11 000
Removing and installing shift lever (AWD)
Special tools required:
•
25 1 120
Necessary preliminary tasks:
-
Remove underbody protection
-
Remove exhaust system
-
Remove transmission cross-member.
-
Remove heat shields
-
Release centre mount.
-
Remove shift lever knob.
-
Remove shift lever cover.
If necessary, remove sound insulation (1).
Lift off retainer (1).
Remove shims (3).
Remove selector rod (2).
Installation:
Grease shift rod pin.
Grease, refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
RA Removing and installing shift lever (AWD)
BMW AG - TIS
18.02.2013 00:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -