5 Series E61 525xi (N53) TOUR
65 50 011
Removing and installing (replacing) video
module for on-board monitor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove flap in luggage compartment panel on left.
•
Version with Top hi-fi amplifier:
Remove storage tray in luggage compartment on left
Note:
Follow instructions for handling optical fibers.
Unlock plug connections (1) and disconnect.
Installation:
Do not mix up antenna connectors (2).
Mark antenna plugs (2) and disconnect.
Release screws (3).
Remove video module for on-board monitor (4) with holder (5)
from luggage compartment.
RA Removing and installing (replacing) video module for on-board monitor
BMW AG - TIS
18.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -