5 Series E61 525xi (N53) TOUR
11 41 Oil Pump with Strainer and Drive
Type
Thread
Tightening specification
Measure
1AZ Intake manifold to crankcase lower
half (bedplate)
N53
M6x30
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
4 Nm
Torque angle
100
°
2AZ Oil pump to crankcase lower half
(bedplate)
N53
M8x123
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
180
°
N53
M8x31
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
90
°
3AZ Oil pump, map-controlled, to
crankcase lower half (bedplate)
N53
M8x37
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
90
°
N53
M6x30
AZD Oil Pump with Strainer and Drive
BMW AG - TIS
18.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -