5 Series E61 530d (M57T2) TOUR
Illustrations show M47TU.
Note:
Store the support bushing (1) of the new crankshaft seal version
as a "special tool".
The old and new crankshaft seal versions can be installed with the
support bushing (1).
Make sure dowel sleeves (1) are correctly seated.
Fit sensor gear.
Note:
The end cover is supplied in the set with a built-in radial shaft
seal and a support bushing. The support bushing is fitted on
the crankshaft seal (to provide protection during transportation
and storage).
Assemble engine.
Check engine for leaks.
RA Replacing rear crankshaft seal (M57T2)
BMW AG - TIS
18.02.2013 01:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -