5 Series E61 530d (M57T2) TOUR
11 42 020
Removing and installing / sealing or replacing
main flow oil filter (M57T2)
Necessary preliminary tasks:
•
Remove acoustic cover
•
Drain oil filter
•
Draining coolant
Important!
Risk of damage:
Protect alternator with suitable apparatus against engine oil.
Recycling:
Catch and dispose of drained coolant.
Catch and dispose of escaping engine oil.
Observe country-specific waste-disposal regulations.
Detach hose (1).
Disconnect plug connection (2).
Release screw (4).
Release screws (3).
Installation:
Clean sealing surfaces.
Replace all profile seals.
RA Removing and installing / sealing or replacing main flow oil filter (M57T2)
BMW AG - TIS
18.02.2013 01:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
