5 Series E61 530d (M57T2) TOUR
17
Plug connection, changeover valve (EGR)
23
Plug connection, term.50 starter motor
18
Plug connection, coolant temperature sensor
24
Plug connection, oil pressure switch
19
Plug connection, high-pressure control valve
25
Plug connection, fuel temperature sensor
20
Plug connection, solenoid valve (engine mount)
26
Plug connection, bus line (alternator-DME)
21
Plug connection, solenoid valve (swirl flap)
27
Plug connection, high-pressure pump
22
Plug connection, boost pressure sensor
Disconnect plug connection (1).
Release nuts (2) and convert pressure transducer to new wiring
harness.
Release lock (3).
Pull out changeover valve (4) towards top and convert to new
wiring harness.
Release nuts (5) and convert preheater control unit to new wiring
harness.
Release screws (6).
RA Replacing wiring harness section for engine (M57TU)
BMW AG - TIS
18.02.2013 02:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -