5 Series E61 530d (M57T2) TOUR
Fit special tool 21 2 170 and tighten down at knurled screw (1).
Screw in spindle (2) until diaphragm spring (3) is tensioned on
stop.
Note:
Insert special tool 21 2 170 only in area of bores for dowel
pins.
Centre clutch plate (1) with special tool 21 2 270 .
Important!
Install clutch plate in correct position.
Note designation for "engine side" / "transmission side".
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Fit clutch (1) to flywheel.
Tightening torque 21 21 1AZ
.
Note:
Clutch (1) must be secured by way of dowel pins (2).
RA Removing and installing/replacing clutch (SAC 240)
BMW AG - TIS
18.02.2013 03:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -