5 Series E61 530d (M57T2) TOUR
View of trimmed rear side panel.
1 = Body outer side.
2 = Radius of trimmed side panel.
Installation:
Apply adhesive (1) to inside of side panel (2) at distance a.
Dimension a = 10 mm
Installation:
Apply adhesive in area (1).
Flange edge of side panel in area (1) flush to outer wheel arch
section.
Flange edge of wheel arch (3) of rear side panel flush to outer
wheel arch section.
Do not flange sharp edges as the flange edge may begin
breaking!
Measurement a=4.5 mm
(1) Adhesive
(2) Side panel, rear
RA Replacing rear left side panel (partial replacement before longitudinal member c
BMW AG - TIS
18.02.2013 09:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
