5 Series E61 530d (M57T2) TOUR
Carefully detach seal (1) from roof with special tool 00 9 318
and hot air blower.
Installation:
Pull liner* off seal (1), centre seal (1) and stick on.
Minimum application pressure is achieved by applying firm thumb
pressure in stages over the entire joining surface (holding time
approx. 1 second).
* Liner is the protective film on a new seal.
RA Replacing rear roof seal
BMW AG - TIS
18.02.2013 12:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
