bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Module For Interior Protection (with Panorama |Page 2838 > < 2 RA Removing And Installing (replacing) Module For Passenger Compartment Sensor|Page 2836
Page 1
background image

65 75 071

Removing and installing/replacing module for
interior protection (with panorama sunroof) 

Special tools required:

00 9 340

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection)!

Unclip trim (1) on both sides with special tool  00 9 340 .

Note:

Carry out subsequent work steps through openings in moulded
roofliner.

Note:

For purposes of clarity, the moulded roofliner is shown removed.

Open cable holders (1).

Unclip catches (2) and disconnect plug connection (3). 

Feed out module (4) through openings in roofliner.

RA  Removing and installing/replacing module for interior protection (with panorama 

BMW AG - TIS

18.02.2013  18:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Module For Interior Protection (with Panorama |Page 2838 > < 2 RA Removing And Installing (replacing) Module For Passenger Compartment Sensor|Page 2836