5 Series E61 530d (M57T2) TOUR
67 33 510
Removing and installing/replacing servolock
drive
Necessary preliminary tasks:
•
Remove top trim from tail panel
Unfasten plug connection (1) and disconnect.
Unclip plug housing (2).
Release screws (3) and remove servolock drive (4) from tail
panel (5).
Installation:
•
Make sure washer (6) is in correct installation position.
•
Adjust rear lid lock.
RA Removing and installing/replacing servolock drive
BMW AG - TIS
18.02.2013 19:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
