5 Series E61 530xi (N52K) TOUR
Attach special tool 11 8 330 to connecting rod.
Press out connecting rod and piston with special tool 11 8 330
to cylinder head side.
Note:
Special tool 11 8 330 simultaneously serves to prevent
connecting rod and piston from falling down.
Important!
Do not touch the oil spray nozzle when removing the
components.
Risk of damage!
Preliminary work:
Clamp special tool 11 4 491 in vice.
Secure piston (1) with connecting rod to special tool 11 4 491 .
Warning!
Danger of injury!
Carry out work on piston pin circlip wearing protective goggles
only.
Warning!
Protective goggles must be worn.
Lever out piston pin circlip with special tool 11 4 492 in direction
of arrow.
RA Removing and installing/replacing all pistons (N52K)
BMW AG - TIS
18.02.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -