5 Series E61 530xi (N52K) TOUR
Note:
Schematic depiction of special tool 11 4 461 at upper bearing
bank (1) and lower bearing bank (2).
Pretension all special tools 11 4 461 with special tool 11 4 350
only.
Important!
Tighten screw (3) on thrust piece to 2 Nm.
Risk of damage!
Position special tool 11 4 461 over screw connection of bearing
banks.
Make sure that the legs rest exactly on the ground surfaces of the
upper bearing bank (2) and lower bearing bank (1).
Initially tighten screw of special tool 11 4 461 to ground surfaces
of upper bearing bank (1) and lower bearing bank (2).
Important!
Tighten screws on thrust piece to 2 Nm. Risk of damage!
Important!
Set special tool
11 4 350
to 2 Nm.
Pretension all special tools 11 4 461 with special tool
11 4 350 only.
RA Removing and installing/replacing exhaust camshaft (N52K)
BMW AG - TIS
18.02.2013 13:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -