5 Series E61 530xi (N52K) TOUR
Detach plug (1) from crankshaft pulse generator (2).
Release screw.
Installation:
Replace aluminium screws.
Tightening torque 12 14 2AZ
.
Withdraw pulse generator (2) from crankcase.
Installation:
Replace sealing ring.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing crankshaft pulse generator (N52, N52K, N51, N53)
BMW AG - TIS
18.02.2013 14:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -