5 Series E61 530xi (N52K) TOUR
12 90 ...
Removing and installing/replacing electronics
box
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
Follow instructions for removing and installing electronic control
units
Necessary preliminary tasks:
•
Read fault memory.
•
Disconnect negative battery cable
•
Remove electronics box fan
•
Remove distribution box (passenger compartment)
•
Release control unit holder; if necessary, release CD changer
Release screws (arrows) behind sound insulation.
Disconnect wiring harness on engine compartment side on right.
Remove electronics box.
Installation:
Make sure gasket (1) is correctly seated on electronics box.
Read fault memory.
RA Removing and installing/replacing electronics box
BMW AG - TIS
18.02.2013 14:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -