5 Series E61 530xi (N52K) TOUR
41 11 516
Replacing left support carrier
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 516).
The reduced-weight aluminum front end structure (GRAV) is used
on this vehicle.
Observe specific procedure.
Place vehicle on straightening bench.
Note:
Damaged support carriers without cracks, sharp-edged damage or
holes can be straightened. After repair work, check support carrier
again for cracks.
Observe frame alignment control dimensions!
Following new body parts are required (refer to EPC):
-
Support carrier partial section
Open riveted joints in areas (1).
Open EMC weld seam in area (1).
RA Replacing left support carrier
BMW AG - TIS
18.02.2013 20:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -