5 Series E61 530xi (N52K) TOUR
51 12 826
Removing and installing/replacing guide for
rear bumper
Necessary preliminary tasks:
•
Remove rear bumper trim
If necessary, feed cable out of guide (2).
Release nuts (1) on guide (2).
Remove guide (2) towards rear.
Tightening torque 51 12 10AZ
.
Installation:
Supports (1) and plug guide (2) on guide (3) must not be
damaged.
Replacement:
If necessary, remove bumper antenna for comfort access system.
RA Removing and installing/replacing guide for rear bumper
BMW AG - TIS
18.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -