5 Series E61 530xi (N52K) TOUR
51 42 ...
Removing and installing/replacing door
pocket on rear left or right door trim panel (up
to 03/2007)
Necessary preliminary tasks:
•
Remove rear door trim panel
Important!
Only drill down to door trim panel area (2) so as not to
damage the contact surface.
Drill out welding spots (1) on door trim panel (2) with 8 mm
dia. welding spot drill bit and remove door pocket.
Note:
Door pocket is welded to door trim panel only on initial installation.
If necessary, release nuts instead of welding spots (1).
Installation:
Secure door pocket with nuts (1) to door trim panel (2).
RA Removing and installing/replacing door pocket on rear left or right door trim pa
BMW AG - TIS
18.02.2013 23:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -