5 Series E61 530xi (N52K) TOUR
51 48 001
Removing and installing/replacing insulation
lining on hood/bonnet
Note:
Illustration created using the E87 as an example. There may be
differences in detail in the case of other vehicle models.
Release threaded rivets (1) on insulation lining (2).
Remove insulation lining (2).
Installation:
If necessary, replace defective threaded blind rivets (1).
RA Removing and installing/replacing insulation lining on hood/bonnet
BMW AG - TIS
18.02.2013 23:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -