5 Series E61 530xi (N52K) TOUR
Detach prestamped positioning aid from backing.
-
Positioning aid "C3" rear door, left (door lock, bottom)
-
Positioning aid "D3" rear door, right (door lock, bottom)
Align positioning aid with printed help markings (X, Y), bore and contact edge (2) to rear door and press.
Seal must rest on positioning edge (1) during sticking.
X
Start of bend radius
Y
Bore for door lock
Important!
-
Do not grip bonding surface.
-
It is not the length of pressing in time but rather the level
of pressing (approx. 10 ... 15 N/cm
2
) which is decisive
here.
-
Separation of seal after pressing destroys the adhesive
layer.
Note:
After being pressed on gently, seal can be pulled off again up to 3
times. Do not dirty adhesive area.
RA Removing and installing/replacing seal on rear door, left or right
BMW AG - TIS
19.02.2013 00:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -