5 Series E61 530xi (N52K) TOUR
61 35 795
Removing and installing (replacing) control
unit for adaptive headlight
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove trim for instrument panel, bottom left
Unlock catch (1) in direction of arrow.
Pull control unit for adaptive headlight (2) out of equipment
carrier (3) slightly.
Unfasten plug connection (4) and disconnect.
Remove control unit for adaptive headlight (2).
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) control unit for adaptive headlight
BMW AG - TIS
19.02.2013 10:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -