5 Series E61 530xi (N52K) TOUR
64 31 053
Removing and installing or replacing fresh air
duct
Necessary preliminary tasks:
All:
•
Remove microfilter housing lower sections on left and right.
•
Remove tension strut on spring strut dome.
Only M57:
•
Remove air cleaner element.
Release screw (1).
Installation:
Tightening torque 64 31 2AZ .
Unfasten screws (2).
Installation:
Tightening torque 64 31 1AZ .
Turn quick-release fastener (3) approx. 90
°
counterclockwise.
If necessary, release screw on pipe clamp.
Installation:
Tightening torque 64 31 3AZ .
Feed out fresh air duct (4) in direction of arrow and remove.
Installation:
If necessary, replace damaged seals.
Make sure fresh air duct (4) is correctly seated.
Security version:
When replacing fresh air duct, pay attention to engine
compartment protective plating.
RA Removing and installing or replacing fresh air duct
BMW AG - TIS
19.02.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -