5 Series E61 530xi (N52K) TOUR
66 51 030
Removing and installing/replacing camera for
Lane Departure Warning
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Expand two-part mirror base cover (1) by pressing from below
and detach.
Feed out two-part mirror base cover (1) and remove.
Note:
Catches of two-part mirror base cover (1) must not be damaged.
Slide camera (1) in direction of arrow out of mounting.
Disconnect plug connection (2).
Installation:
Make sure camera (1) is firmly seated in mounting.
Replacement:
Carry out calibration via BMW diagnosis system:
Service functions:
-
Body
-
Lane Departure Warning
-
Calibrate camera
RA Removing and installing/replacing camera for Lane Departure Warning
BMW AG - TIS
19.02.2013 13:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -