5 Series E61 530xi (N52K) TOUR
Release screw (1) and remove inertia reel unit (2).
Tightening torque 72 11 21AZ
.
Installation:
Pay attention to coding.
Guide lug of inertia reel unit (2) must be correctly seated in
opening in body.
Removing lower strap fittings:
Release screws (1).
Tightening torque 72 11 23AZ
.
Remove lower strap fittings (2).
Remove anchor fitting for middle upper strap (3).
Installation:
Ensure correct installation sequence and installation position:
•
Fittings of center lower strap/center upper strap must rest on
stop (1).
•
Secure lower strap on left and right through guides (2).
Removing lower strap fittings with belt tensioner (if necessary):
Release screws (1).
Tightening torque 72 11 23AZ
.
Remove lower strap fittings (2) on left and right.
Remove lower strap fitting (3).
Installation:
Holder for lower strap fitting (3) must be fitted below lower strap
fitting on right (2).
RA Removing and installing/replacing all rear seat belts
BMW AG - TIS
19.02.2013 14:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -