5 Series E61 530xi (N52K) TOUR
be reactivated.
Effective range for acoustic warnings:
•
approx. 60 centimetres for the ultrasonic sensors at the two corners of the front bumper
•
approx. 70 centimetres for the two middle ultrasonic sensors in the front bumper
•
approx. 60 centimetres for the ultrasonic sensors at the two corners of the rear bumper
•
approx. 150 centimetres for the two middle ultrasonic sensors in the rear bumper
Visual warnings
The visual PDC warnings are given in the Central Information Display (CID). This is subject to the display in the
CID being active.
The visual warnings are given earlier than the acoustic warnings.
The effective range is approx. 2 metres at the front and approx. 2.5 metres at the rear.
The graphic display is shown on the CID. The PDC control unit supplies the distance between the ultrasonic
sensor and the object detected via the K-CAN.
The display on the CID is an overhead view of the vehicle with the effective ranges of the ultrasonic sensors.
The distance to objects detected is shown in the colours of traffic lights:
•
Distance down to 100 centimetres: green
•
Distance between 100 an 50 centimetres: yellow
•
Distance less than 50 centimetres: red
The display appears as soon as the PDC is switched on (manually or automatically). The display overrides other
displays in the CID. When the PDC is switched off again, the previous display automatically appears again in the
Central Information Display.
Check Control
If a fault develops in the PDC, the function LED in the PDC button flashes.
In this situation, PDC cannot be switched on.
At the same time, a Check-Control message is displayed in the following form
•
Symbol in the LCD display in the instrument cluster
•
The following text appears in the status line of the Central Information Display:
"PDC failure!"
In the menu "BMW Service", the following text can be called up in the submenu "Check-Control messages":
"Park Distance Control
No acoustic warning available for Park Distance Control (PDC).
Have the problem checked by BMW Service as soon as possible."
Conditions for switching on and off
PDC is switched on under the following conditions:
-
PDC button pressed (PDC switched on manually)
-
Reverse gear engaged (PDC switched on automatically)
PDC is switched off under the following conditions:
-
PDC button pressed (PDC switched off manually)
-
Ignition switched off (PDC switched off automatically
SBT Park Distance Control E60, E61, E63, E64
BMW AG - TIS
19.02.2013 23:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -